Well as the year winds down so does my series on Dake presses, set up, trouble shooting and maintenance. Today we are looking at our Dura press and Dura Force models. This series of presses are jam packed with capacities and features at an affordable price. Such presses have self-contained pumping units and double acting workheads. So, let’s get cracking getting your Dura press installed. Ok I’m in a hurry I admit it, but I am getting ready for vacation time the rest of the year and want to make sure you get up and running. Here we go…
Thanks for visiting our blog, I look forward connecting with you to next year. HAPPY HOLIDAYS
Your new Dake Press has been packaged in a manner to prevent damage to any critical components; some assembly may be required. All parts in the accessory box are critical to the function of your press. Some presses may come completely assembled.
NOTE: FOR EASE OF ASSEMBLY LEAVE THE PRESS FRAME MOUNTED ON THE SHIPPING SKID
WARNING!!!!
Be sure all bolts and fittings are tight before operating this pumping unit, personal injury could result.
NOTE: REFER TO INSTALLATION MANUAL FOR IN-DEPTH HEAD INSTALLATION AND HOSE INSTALLATION INSTRUCTIONS.
For shipping convenience, some of the parts are not assembled. Assemble these parts in the following order:
NOTE: The press should set on a level floor with the base angles touching the floor at all points. Use shims where necessary.